Articles

Home electrical risks hiding in plain sight | PEMCO

November 19, 2026 by PEMCO Insurance

Home electrical risks hiding in plain sight

GettyImages-1191423199.jpg

Could you be walking past electrical hazards in your home without realizing it? Everyday items like surge protectors, space heaters, and battery chargers can become fire risks if they’re worn out or misused. And if you live in a vintage home with wiring that was never designed to handle modern upgrades like EV chargers, trouble could be hiding just out of sight behind the walls.

With colder temps and holiday preparations likely putting extra demands on your home’s electrical system, now’s a great time to check five common trouble spots:

1. Surge protectors, power strips, and extension cords

Damaged and overloaded surge protectors, power strips, and extension cords may not warn you they’re about to fail. Instead, their internal components quietly degrade over time.

What to watch for:

  • Age or visible wear. Replace frayed extension cords and surge protectors that no longer display green indicator lights. Because surge protectors lose capability with each electrical hit they fend off, safety experts recommend you replace them every two to five years. Do it immediately if your neighborhood suffers a transformer-blowing event like a lightning strike.
  • Overloading. Plugging in too many devices or daisy-chaining (connecting multiple power strips or extension cords together) can cause dangerous overheating.
  • Indoor cords being used outdoors. Indoor-rated cords can’t withstand exposure to outdoor moisture.
  • Hidden cords. While it’s tempting to hide an “ugly” cord under a rug, that can cause overheating. Also, since it’s out of sight, you won’t know if it’s become damaged or pinched.
  • Power strips as a permanent wiring solution. If you’re short on outlets, hire a licensed electrician to make sure demands don’t exceed your wiring capacity.

2. Space heaters

Many space heaters are electricity hogs, and older outlets and overloaded circuits may not handle the load safely.

What to watch for:

  • Warm or discolored cords. That indicates overheating, which can start a fire.
  • Crowded outlet. Plug space heaters directly into the wall, never into a power strip. And make sure it’s the only device using that outlet.
  • Elevated base. Don’t set a space heater on a workbench or table. It should sit level on the floor on a nonflammable surface. Don’t use a space heater that doesn’t shut off automatically if it tips over.
  • Flammables within three feet. Keep curtains, furniture, clothing, and paper at least three feet from the space heater.
  • Unattended. Never use a space heater while sleeping or when an adult isn’t present to supervise its use.

3. Battery chargers

The lithium-ion batteries that power our phones, laptops, and much more usually work flawlessly. But in the rare cases when they do fail, they can fail spectacularly. Battery fires are dangerously difficult to put out. The National Fire Protection Association (NFPA) notes that risk increases with improper use.

What to watch for:

  • Chargers not designed for the device. Use the original charger provided by the manufacturer or a manufacturer-approved replacement (not a cheap knockoff). If the cord becomes frayed or crimped, replace it.
  • Temperature extremes. Don’t charge below 32°F or above 105°F. Many smartphones won’t charge if they detect unsafe temperatures, but other devices may not.
  • Continuous charging. Once your battery is full, take it off the charger to reduce its risk of overheating and to extend battery life. Many devices like smartphones and laptops have built-in overcharging protection, but others may not.
  • Soft surfaces. Don’t charge devices under pillows or on beds or upholstered furniture. They trap heat and block airflow, damaging the battery’s internal barrier and potentially leading to fire. Instead, charge on a solid flat surface.
  • Odors, changes in color, swelling, excessive heat, leaking, or odd noises. Unplug the device and, if safe to do so, move it outside and away from anything that could burn. Don’t try to use it. Call 9-1-1 if it’s hissing or smoking, which are signs of “thermal runaway” and high fire danger. Don’t toss the device in the trash.

4. EV chargers

EV charging adds an extra load to home electrical demands. If you charge at home, the NFPA recommends you have a qualified electrician check your electrical system. Older outlets may not be designed for continuous high-load charging.

More from NFPA:

  • For Level 1 Charging (the slower kind that uses a standard household plug and the charging cord that came with the car): Make sure the charger or outlet has GFCI protection and use only a dedicated circuit to avoid overloads. Never use an extension cord.
  • For Level 2 Charging (the faster kind that uses a 240-volt outlet and provides a full charge within a few hours): A qualified electrician needs to install this type of outlet, and it requires a permit. If you install it outdoors, select an outdoor-rated charger and keep cords off the ground.
  • Before every charge, check the cord and charger for signs of damage.

5. Older homes

Older homes can hide electrical issues that aren’t apparent until something goes wrong – often years after the original installation. Many Gen-Xers who inherit family homes discover outdated systems that need attention before they can rent or sell them. Tipoffs to trouble include frequently tripped breakers, scorched or warm outlets, “hot” plastic or rubber smells, buzzing noises, and flickering lights.

What to watch for:

  • Failed wiring insulation. Wiring used in homes built before 1960 has a useful life of about 70 years before its insulation starts breaking down. (Post-1960s wiring lasts closer to 100 years.)
  • Outdated electrical panels. Like wiring, service panels and circuit breakers can deteriorate. Breakers last 30 to 40 years (less if they’ve been compromised by leaks or other damage). Failing panels and breakers can cause shocks, loss of power, and even fires.
  • Aluminum wiring. Copper, not aluminum, is standard for residential wiring in modern construction. Aluminum wiring used in older homes has a greater tendency to oxidize and expand, which can loosen connections and increase the risk of overheating and fires.
  • Too few outlets. Older homes weren’t designed for today’s technology. Overloaded outlets and extension-cord use increase risks.
  • Unpermitted work. Most electrical installations (apart from some like-in-kind replacements) require permits and inspections. If you suspect your home has unpermitted electrical work, it’s never too late to do the right thing. Consult a licensed electrical contractor and have them obtain a permit and make any necessary corrections to the existing work before requesting an inspection. Here’s more on that for Washington residents from the Department of Labor & Industries. In Oregon, the state’s Building Codes Division (BCD) oversees electrical permitting and inspections.

Helping you prevent the preventable

Electrical systems are easy to overlook because they’re mostly hidden, and when everything seems fine, it’s natural to assume that it is. But a little extra vigilance goes a long way in protecting your home and keeping your family safe. For more tips like these, visit our Home Fires Blog.

Share on social media